Consulting fees: one hourly rate behind every price you quote.
A consultant's hourly rate does most of its work as a price list, building the fixed fee line by line and pricing every interview, workshop or meeting the client adds, so it has to come from the hours you can actually sell.
Consulting fees are what a consultant or agency charges for advice, research and planning, usually as an hourly or day rate, a fixed project fee, a monthly retainer or a value-based price. Whichever of those the client sees, an hourly rate sits underneath it, so work that rate out from the hours you can actually bill rather than every hour in the year, build the project fee from it line by line, and print the same rate as the price of every interview, workshop or meeting the client adds once the engagement is running. A fee that leaves out that last part gets quietly cut every time the work grows.
The example running through every section below is a three-partner marketing strategy agency in Kalamazoo, Michigan, which was asked in late February 2027 to write a patient acquisition plan for Cedar Hollow Dental Group, five family dental offices around Lansing. The partners needed a rate before they could quote, then a fee, and before the nine weeks were over they needed prices for two requests nobody had planned for.
What are consulting fees, and how are they usually charged?
Consulting fees are the prices charged for advice and analysis, and they're usually set in one of five ways: by the hour, by the day, as a fixed fee for a defined project, as a monthly retainer, or as a share of the value the work is expected to create. Consulting Success, whose fees study surveyed nearly 1,000 consultants and was last updated on October 19, 2026, found project pricing the most common at 30% of respondents, with hourly billing close behind at 29%, then monthly retainers at 16%, value-based pricing at 15% and daily rates at 10%.
Those labels describe what the client sees on the proposal, and they hide how closely the five are related. A day rate is an hourly rate multiplied by the hours in a working day, a fixed fee is an hourly rate multiplied by an estimate, and a retainer is an hourly rate multiplied by the time you hold back each month. Even a value-based price needs a floor, because a fee below what the hours cost you is a loss however much the client gains from it. Our article on agency pricing models covers what each model leaves unpriced, and for a consultant the practical point is that every one of them stands or falls on the rate underneath.
How do you work out a consulting hourly rate?
Add up what the practice has to bring in over a year, then divide it by the hours you'll actually bill rather than the hours you'll work. The Kalamazoo partners each drew $105,000, payroll taxes and health insurance added $63,000, and software, insurance, the accountant, travel and the research panels they rent came to $52,000, which put their costs at $430,000. They wanted $70,000 of profit on top of that, so the year had to bring in $500,000.
The divisor is where the published formulas part company, so it's worth taking them one at a time. Mailchimp's article divides the income you want by 30 hours a week across 52 weeks, which is 1,560 billable hours a person, and arrives at about $64 an hour on a $100,000 target. Embroker's, published in May 2026, starts from a salary instead, divides it by 52 weeks and 40 hours and then adds 50% for expenses. Applied to one partner's $105,000, Embroker's method gives about $76 an hour, and Mailchimp's applied to the whole $500,000 across three partners gives about $107.
Neither figure survives the partners' real calendar. Each of them works about 46 weeks a year once holidays, vacation and sick days come out, and on consulting work a large share of every week goes to discovery calls, proposals, invoicing and the gaps between engagements. They assumed half of a 40-hour week would be billable, which is 920 hours each and 2,760 between them, and $500,000 over 2,760 hours is $181.16, so they set the rate at $185. At Mailchimp's $107, those same 2,760 hours would have brought in $295,320 against $430,000 of costs, a shortfall of $134,680 before anyone had a slow month. The same arithmetic for a build sits in our article on how much to charge for a website, and consulting tends to land higher because selling advice eats more unbilled time than selling a site does.
Should you charge consulting clients by the hour or a fixed fee?
For a defined piece of work, sell a fixed fee and keep the hourly rate as the price of everything the fee doesn't name. Billing advice by the hour turns the client into a timekeeper, and the conversation drifts from whether they want something to how long it should have taken, which is the argument our consulting contract template is built to avoid. A fixed fee moves the risk of a slow week onto you, and that's a fair trade as long as the fee says what it covers in countable terms, because then a request outside it is visibly a new request with a price attached rather than a favor.
Hourly billing still suits open-ended rescue work, where nobody can say what you'll find until you start digging, as long as it carries a written cap and a check-in when the hours approach it. The trade-off is the one laid out in our comparison of time and materials vs fixed price, and on most strategy work the fixed fee wins because the client is buying an answer they can act on, which a timesheet doesn't describe.
How do you turn an hourly rate into a project fee?
Estimate the hours line by line, multiply each line by the rate, and show the client the lines as well as the total. Cedar Hollow's engagement broke down like this, at $185 an hour throughout: eight interviews with dentists and office managers at two hours each including preparation and notes, $2,960; a patient survey designed and analyzed in 22 hours, $4,070; a review of booking, website and ad spend data in 26 hours, $4,810; two workshops with the office managers at nine hours each including preparation, $3,330; the strategy document and a 12-month channel plan in 38 hours, $7,030; the presentation to the owners and a follow-up call 30 days later in eight hours, $1,480; and weekly calls and project management in 14 hours, $2,590. That comes to 142 hours and a fixed fee of $26,270.
Consulting Success handles uncertainty a different way. Its worked example adds up 30 hours at $100 to reach $3,000 and then multiplies by 1.5 as a buffer, quoting $4,500. A buffer is honest about projects running long, but it charges every client for overruns most of them won't cause and still leaves the one client who does cause them without a price. Listing the lines does the opposite job, because it tells Cedar Hollow what the $26,270 buys in units anyone can count, eight interviews and two workshops, so a ninth interview is plainly something extra.
Payment followed the logic our article on net 30 payment terms sets out for agency work. Half the fee, $13,135, was invoiced when the agreement was signed on Thursday, March 4, 2027, and was due on receipt, while the other half would be invoiced at the presentation with 30 days to pay, since by then the work would be finished.
What should a consulting fee say about extra work?
It should print the price of each likely extra in the same units as the fee, worked out from the same rate, and say who on the client's side is allowed to approve one. Cedar Hollow's agreement priced an additional interview at $370, an additional workshop at $1,665 and anything else outside the plan at $185 an hour, quoted in writing before any work began, and it named Marisol Petrakis, the group's director of operations, as the one person who could accept a quote. Our consulting proposal template does the same thing for advisory retainers, where the extra the client asks for is usually a session rather than a workshop.
The engagement started on Monday, March 8, and the first request arrived in week four. On Tuesday, March 30, the group's owner, Dr. Owen Haberle, mentioned that Cedar Hollow had just bought an orthodontics practice and asked whether the plan could cover it as a sixth office. That meant four more interviews at $370 each and ten hours reviewing a practice with its own booking system, $1,850, so 18 hours and $3,330 in all. The agency logged the request in Docket, which carried the price the partners had set to Marisol as the named approver and kept her approval, dated Thursday, April 1, in the project record next to the signed agreement.
The second request came on Wednesday, April 21, when Marisol asked for a third workshop with the front-desk staff, who turned out to shape more of the booking problem than anyone had expected. The printed price was $1,665, she approved it on Friday, April 23, and nobody had to negotiate anything, because the number had been sitting in the agreement since early March.
What does unpriced extra work cost a consulting practice?
It costs the rate you thought you were charging. Had the agency absorbed both requests, the engagement would have taken 169 hours for $26,270, which is $155.44 an hour and about $26 below the $181.16 the partners needed just to reach their year. Billed at the printed prices, the final invoice sent on Thursday, May 6, came to $18,130, the second half of the fee plus $4,995 for the two approved changes, and the engagement closed at $31,265.
The $4,995 looks small against a $500,000 year until you set it against profit, where it's about 7% of the $70,000 the partners were aiming for, won or lost on one client in nine weeks. A practice that absorbs two requests like these on each of a dozen engagements a year has given away most of its margin without ever deciding to. That's the ordinary cost of scope creep on advisory work, and it's why the price of the extra belongs in the agreement rather than in a conversation after the work is done.
How do day rates and retainers fit around the hourly rate?
A day rate is the hourly rate multiplied by the hours you'll realistically spend on the client's work that day, and a retainer is the hourly rate multiplied by the time you reserve each month, sold as one monthly fee. At $185 an hour, a seven-hour working day at one of Cedar Hollow's offices would be $1,295, and a consultant who quotes a round $1,000 a day to sound reasonable is charging about $143 an hour for that day. Pricing the day from the rate keeps the two consistent, so a client can't save money simply by asking for your time in a different unit.
Consulting Success gives one rule for retainers that we'd keep, which is to bill them in advance at the start of the month the work covers, so the client pays for time you're holding rather than reimbursing time already gone. What we'd add is that an advisory retainer sells better as access than as a bank of hours, for the reasons our article on the monthly retainer gives, with the hourly rate kept as the price of anything beyond what the month includes.
Every hour outside the fee already has a price of $185
Cedar Hollow's agreement turned two surprises into two invoices with one sentence: an additional interview at $370, an additional workshop at $1,665, anything else at $185 an hour quoted in writing first, and Marisol Petrakis as the person who approves it. It took a minute to write in March and was worth $4,995 by May, and it held up because the partners had built $185 from their own costs and their own billable hours rather than borrowing it from a rate survey.
Set your rate that way and the rest of your consulting fees follow from it: the fixed fee as the sum of its lines, the day rate as a multiple, the retainer as reserved time with a price for the overflow. If you're putting a fee into a document this week, our consulting statement of work template shows rates like these written into a full scope, with the change wording around them already in place.
Frequently asked questions
What are typical consulting fees?
There isn't one typical figure, because a fair rate depends on what the practice costs to run and how many hours it can bill. Mailchimp, citing Consultancy.org, puts independent consultants' earnings anywhere from $50,000 to more than $400,000 a year. Work out the rate your own costs need first, then compare it with what clients in your field are used to paying.
How do you calculate consulting fees from a salary?
Embroker's method divides the salary by 52 weeks and 40 hours and then adds 50% for expenses, which turns $105,000 into about $76 an hour. That treats every working hour as billable, so a sturdier route is to add salary, payroll costs, overhead and profit together and divide by the hours you'll actually bill, which was about 920 a year per partner in our example.
Is $100 an hour good for consulting?
It depends on how many hours you can bill in a year. At 920 billable hours, $100 an hour brings in $92,000 before taxes, software, insurance and travel come out of it, which is thin for an experienced consultant. Work out the rate your costs need and judge $100 against that number rather than against a survey.
What is a consultant day rate?
A day rate is a single price for a day of a consultant's time, usually the hourly rate multiplied by the hours you'll spend on the client's work that day. At $185 an hour, a seven-hour day comes to $1,295. Pricing the day from the hourly rate keeps your fees consistent whichever unit the client asks for.
Should consulting fees be paid upfront?
Usually part of them should be, and a common arrangement for a fixed consulting fee is half at signing, due on receipt, and the rest when the finished work is presented. Consulting Success recommends billing retainers in advance, at the start of the month the work covers, so the client pays for time you're holding rather than time already spent.
How should consulting fees handle an extra meeting or workshop?
Print a price for each likely extra in the agreement, worked out from your hourly rate, and name the one person on the client's side who can approve it. In our example an additional interview was $370 and an additional workshop was $1,665, so a request in week four became a quote the client could accept instead of a negotiation.